MS-9600 and DACT-UD

The Fire•Lite MS-9600 is a compact, cost-effective, intelligent addressable fire alarm control panel with a capacity of 318 addressable Fire•Lite devices on one Signaling Line Circuit (SLC) or a total of 636 addressable points with an optional second loop (SLC-2). An optional 14.4K Baud modem (DACT-UD) is available for remote site upload/download and/or remote monitoring. Each Signaling Line Circuit (SLC) loop supports up to 159 addressable detectors including photoelectric, photoelectric with heat, ionization, photoelectric duct, fixed heat, fixed heat with rate-of-rise, and fixed high-heat detectors. It also supports up to 159 addressable modules including monitor (twowire detector, normally open devices), dual-monitor functions (two monitor circuits from one module, two addresses used), control (for Notification Appliance Circuits), and relay (two Form-C) modules. The panel uses surface-mount technology and is designed for ease of installation, programming, and maintenance. It features the latest in advanced fire protection technology, including maintenance alert and automatic detector test functions.
MS-9200

The Fire•Lite MS-9200 is a compact, cost-effective, addressable fire alarm control panel with a capacity of 198 Fire•Lite 300 Series devices. A single Signaling Line Circuit (SLC) loop supports up to 99 smoke detectors and 99 control or monitor modules. The panel uses surface-mount technology and is designed for ease of installation and programming. It features the latest in fire protection technology, including maintenance alert and automatic detector test.
Dual Style Y or Z integral Notification Appliance Circuits (NACs) supply the panels 3 amps of NAC power which is expandable to 6 amps (with an optional XRM-24 Transformer).
Sensiscan 2000

The Fire•Lite Sensiscan 2000 Fire Alarm Control Panel (FACP) is a multi-zone unit designed for maximum flexibility and ease of installation. The microprocessor control and modular construction enable users to configure the system to meet their precise requirements. Filed programmability simplifies initial installation and allows quick updates to meet future needs.
The center of the system is the Central Processor Unit (CPU-2000) module, which monitors and controls up to 7 other modules. Modules are user-selected and may be installed in various combinations to provide up to 56 input/output circuits.
Internal communications are accomplished over a high-speed serial data bus. Each module on the bus is automatically addressed, supervised and controlled by the CPU-2000.
MS-5024UD

The Fire•Lite MS-5024UD is a 24-volt, five-zone Fire Alarm Control Panel with Built-in Communicator, remote-site upload/download capability and 3 amps of Notification Appliance power (expandable to 5 amps). The integral communicator transmits event information (alarms, troubles, supervisories, faults, etc) to a UL listed central station. The MS-5024UD may be used in a variety of cost-effective applications, including: local fire alarm control panel (communicator disabled), fire alarm control panel/communicator, stand-alone sprinkler supervisory communicator or slave communicator to a UL listed host fire alarm panel (requires N.O. dry contacts to trigger 5 channels). Selectable transmission formats allow the MS-5024UD to communicate to virtually all central stations.



MS-5210UD

The Fire•Lite MS-5210UD is a 24-volt, 10-zone (programmable) Fire Alarm Control Panel with Built-in Communicator and remote-site upload/download capability (requires panel software revision #MS52103.0 or greater). The integral communicator transmits event information (alarms, troubles, supervisories, faults, etc) to a UL listed central station. Fifteen selectable transmission formats allow the MS-5210UD to communicate to virtually all central stations. The MS-5210UD includes 3 amps of Notification Appliance power, expandable to 6 amps.
     ADDRESSABLE DETECTORS & MODULES

SD350(A) / SD350T (A) Photoelectric Detectors (for MS-9200 & MS-9600)
The new SD350 and SD350T Intelligent Photoelectric Detectors are used with Fire•Lite's MS-9200 and MS-9600 Addressable Fire Alarm Control Panels. Since these detectors are addressable, they will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. The SD350T offers the same features as the SD350 while adding a 135-degrees F internal thermal element.

CP350(A) Ionization Detector (for MS-9200 & MS-9600)
The CP350 Intelligent Ionization Detector is used with Fire•Lite's MS-9200 and MS-9600 to sense products-of-combustion and report the measured level of such products to the control panel. Since this detector is addressable, it will help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage.

H350/H350R Heat Detectors (for the MS-9600)
The H350/H350R Intelligent Thermal (Heat) Detectors used with Fire•Lite's MS-9600 are addressable sensors that use a state-of-the-art thermistor sensing circuit for fast response. These sensors are designed to provide open area protection.

D350P/D350RP Duct Detectors (for MS-9200* & MS-9600)
The D350P/D350RP Intelligent Photoelectric Duct Detectors are used with the Fire•Lite MS-9600 and MS-9200 addressable fire alarm control panels.   *On the 9200, they can only be used as alarm devices, not as Supervisory devices.  The D350RP offers the same features as the D350 while adding a Form-C relay.

MMF-300 Series & MDF-300 Monitor Modules (for MS-9200 & MS-9600)
The MMF-300 Series and MDF-300 Addressable Monitor Modules are used with Fire•Lite's MS-9200 and MS-9600. These addressable modules provide Initiating Device Circuits that monitor normally-open contact alarm initiating devices, and two and four-wire detectors.

CMF-300 & CRF-300 Control Modules (for MS-9200 & MS-9600)
The CMF-300 and CRF-300 Addressable Control Modules are used with Fire•Lite's MS-9200 and MS-9600. These addressable control modules provide Notification Appliance Circuits (CMF-300) and Form-C Output Relay (CRF-300).
ADDRESSABLE FIRE PANELS
LCD ANNUNCIATORS
LCD-80F is a compact, cost-effective, 80-character, backlit LCD Fire Annunciator for use with the MicroScan-9600 Addressable Fire Alarm Control Panel. The LCD-80F is capable of displaying English-language text of system point status including: device type, independent point alarm, trouble or supervisory, zone and custom alpha labels programmed into the MS-9600. The LCD-80F also provides system status LEDs to display Power, Alarm, Trouble and Supervisory. The annunciator provides remote control capability of critical system functions, such as Reset, Signal Silence, Acknowledge, and Drill.

LCD-40 Series are compact, cost-effective, 40-character, backlit LCD Fire Annunciators for use with the MicroScan-9200 Addressable Fire Alarm Control Panel. The LCD-40 Series consists of two models: the basic LCD-40 and the low-cost LCD-40L. The LCD-40 Series are capable of displaying English-language text of system point status including: device type, independent point alarm, trouble or supervisory, zone and custom alpha labels programmed into the MS-9200. The LCD-40 Series also provides system status LEDs to display Power, Alarm, Trouble and Supervisory. Remote control of critical system functions, such as Reset, Signal Silence, Acknowledge, and Drill, can be accomplished with the model LCD-40 only.

CONVENTIONAL FIRE PANELS
ACC-25/50ZS -
Audio Command Center•25/50 Zone Splitter Voice Evacuation Control Panel

The Audio Command Center•25/50 Zone Splitter System (ACC-25/50ZS) is a state-of-the-art Emergency Voice Evacuation Panel (EVAC) capable of splitting up to 50 watts of audio power into up to eight zones. The ACC•25/50ZS provides the ability to record five field-programmable messages (up to 60 seconds total message duration) with an integral commercialgrade emergency communications microphone or from an external audio source. Significant technological enhancements set the ACC•25/50ZS apart from other EVAC panels — these include full supervision in both active alarm and standby conditions, supervision of amplifier outputs, field wiring, message generator, all tone generators, and the microphone. The integral power supply is capable of charging up to 18 AH batteries, which can be housed in the ACC•25/50ZS cabinet.
The ACC•25/50ZS is suitable for use as an adjunct (slave or stand-alone) to most UL-Listed Fire Alarm Control Panels (FACPs). An optional 25 watt, 25 VRMS audio amplifier is available for system expansion to 50 watts or as a secondary amplifier in jurisdictions requiring such backup. A 70.7 VRMS converter is also available for independently converting amplifiers to meet retrofit needs.

Features :


  • 25 watts of audio power can be divided into eight Style Y (Class B) or four Style Z (Class A) zones, utilizing the zone splitter module (ACC-ZSM).
  • Full manual control of all audio zones provided by zone page module (ACC-ZPM).
  • Activation by the FACP using the ACS serial link and/or the five Command (CMD) inputs.
  • ACS serial link compatible with all Fire•Lite FACPs, depending on function.
  • FACP automatically directs the voice message to each or all audio zones.
  • Paging by zone or All-Call.
  • Full status indication (normal, active, fault) of each speaker zone.

VOICE EVACUATION PANELS
Orlando Fire Alarm Systems
All Rights Reserved / SmartWatch Security & Sound, LLC

FIRE